Acrylic nails. Nail art designs. French manicure. Nail courses. Nail technician. Nails video.

FOR NEW AND SEMI-PROFESSIONAL:

How to achieve strength and durability Nails!

The most important thing for any wizard - this 4 rules:

1. Preparation of the natural nail!
2. Setting Forms!
3. Display of material!
4. Opilivanie and grinding the material!

1. Start with disinfecting their hands and the client. Wash thoroughly and wipe clean cloth. Use dezinfektor, which kills bacteria.
During the preparation of natural nails must be removed pterigy and shine natural nails. Even small remnants pterigiya in the future lead to oslaivaniyu material. By the same implications of poor remote shine with natural nail plate. Pterigy remove pusherom (but the client will be painful and not comfortable), but the special nozzles used in the hardware manicure (pedicure) would be best. Blesk natural nail plate removed to better pilochkoy gritnostyu 180/180.
After preparing the natural nail apply degreaser (degidrator, with Primer, etc. - each of their names). This product when applied to the nail indicates whether he is ready to build and use primer. If you noticed on natural nails glossy spots after applying degreaser, try again with opilivaniem, then obezzhirte.
Apply Primer. Technology build-up of nails "Primer on the natural nail plate sprayed 2 times a little with a break 1 minute (do I need to Primer prosoh). Application of primer leads to improved adhesion of the material with natural nails.
2. We shall now proceed to install the forms. The form should stand up without gaps, and in no case go to the natural nail, depends on the strength and sustainability of nails. (For more information you can read this blog from the column "The technology to build" theme from 05.10.08g. "Capacity nail technology, substitute the form ...".

3. Now begin to simulate nails.
Let's start with the modeling of free edge. I prefer to ONS, ibd, CND creativity - these materials samovyravnivayuschiesya. If the material is laid correctly, it will create a smooth surface. Pay attention to the acrylic balls: they must be silk in appearance and consistency to resemble a slightly podtaevshee oil. Depending on the length of the free edges, they vary in size (of course, for the middle finger the ball will be more than little finger). Try one of the balls to put the length and form 90% of smiles. It is difficult, but the saving of material and time. If you want, then by small semi-balls form a thick consistency corner, completing the line smile. (The video shows the jacket with the elements of design, to put a white coat with a transparent powder glitterom to make a light shine).

Spread pink acrylic (in this case, the roller is used to extend the nail plate). For consistency, it should be the same as white. This acrylic ball located at the smile line. It is important that the pink acrylic went back to back with white, does not go to him and not to create bubbles. Otherwise, a white coat will be cloudy, but because of the bubbles will acrylic nail detachment. The second ball of clear or pink acrylic is located in the inner lining and stretch along the length of nail, forming arch (in this case, we will save the design in the nail), paying particular attention to the area of the inner lining (the material should be based on a thin layer and well-pinned)
Having completed the simulation, uncheck the form and squeeze the nail. Remember the most important: the client should not be painful! By compressing the arch, you can get a perfect nail shape, especially if during the procedure to draw attention to the parallel sides. Clench nail needed to complete polymerization of acrylic.

4. We turn now to opilivaniyu nails. Full course opilivaniya see the heading "The technology to build" theme from 31.10.08g. "Nail extension. Nail art..."